|
 |
 |
|
| |
The
eX 801S Single CPC Main Frame houses all the module cards and distributes
the incoming power supply to the frame's multi-voltage power supply
rail. The main frame features ten card slots for various module cards,
Central Processing Card (CPC), and the Power Supply Inlet Card. The
eX 801S utilizes a CPC to control and monitor all operation. The front
panel of the main frame is integrated with indicators to state the
status of the unit such as Power, CPU off, Fault and Status. The main
frame also transmits audio and data information to the extension frame
for additional module cards if required.
|
|
eX
801S / 802S
|
|
Power
Requirement |
24
Vdc (Regulated), 1.5 A
|
|
No.
of Central Processing Card
|
1
no. eX 821S
|
|
No.
of Power Supply
Inlet Card
|
1
no. eX 881S
|
|
No.
of Card Slot per Frame
|
10
(eX 801S)
9 (eX 802S)
|
|
Indication |
Power,
CPU OFF, Fault, Status (eX 801S)
Power, CPU OFF, Fault, Status 1, Status 2 (ex 802S)
|
| |
Material
& Finish
|
Mild
Steel; Epoxy Coated Steele Blue (RAL 5011)
|
| |
Dimensions (W x H x D)
|
483
x 133 x 200mm |
| |
Weight
|
2.9
kg (eX 801S)
3.1 kg (eX 802S) |
The
Extension Frame is used when additional module cards are needed to
cater for a more extensive public address system. Similar to the main
frame, the extension frame accepts power supply and converts it to
a lower voltage for module cards usage. The eX 803S features ten card
slots, Extension Card and Power Supply Inlet Card. Status indicator
for Power is available on the front panel of the frame.
| |
|
eX
803S
|
| |
Power
Requirement |
24
Vdc (Regulated), 1.5 A
|
| |
No.
of Power Supply
Inlet Car |
1
no. eX 881S
|
| |
No.
of Extension Card |
1
no. eX 824S
|
| |
No.
of Card Slot per Frame |
10
|
| |
Material
& Finish
|
Mild
Steel; Epoxy Coated Steele Blue (RAL 5011)
|
| |
Dimensions
(W x H x D) |
483
x 133 x 200 mm
|
| |
Weight
|
2.7
kg |
The
eX 811S Control Manager is the proprietary software which is exclusively
integrated with the eX 800S Series to enable the user to configure
and customize the eMatrix System to suite its application. It allows
user to configure input channel, output zones, time scheduler, failure
output patterns, system diagnosis settings and many other functions.
The Control Manager supports up to 3500 event logs, which records
the system’s activities and faults. software which is exclusively
integrated with the eX 800S Series to enable the user to configure
and customize the eMatrix System to suite its application. It allows
user to configure input channel, output zones, time scheduler, failure
output patterns, system diagnosis settings and many other functions.
The Control Manager supports up to 3500 event logs, which records
the system’s activities and faults. Moreover, the software enables
the user to perform tests to check the status of audio path, hardware
cards and so on. It also provides a constant monitoring system so
that the eMatrix System is in optimum working condition. For security
reason, the software provides 3 types of user access level password
protection for authorised user, operator and visitor.
The
Central Processing Card has a built-in Real Time Clock and a CPU fault
detection circuit. The Central Processing Card main function is to
coordinate the activities of the module cards as well as to process
the configuration from Control Manager to the respective module cards.
The card is integrated with various connectors to allow it to communicate
with other system such as the iX 156E, ix 157E and iX 159E. The eX
821S card is also able to coordinate a simultaneous voice evacuation
process using its onboard Evacuation Management System.
|
|
eX
821S
|
|
Connector |
1
No. RJ 45 Connector
1 No. USB Connector
1 No. DB9 Female Connector
|
|
Power
Requirement |
24
Vdc (From Backplane), 650 mA
|
|
Material
& Finish |
Mild
Steel; Epoxy Coated Steele Blue (RAL 5011)
|
|
Dimensions
(W x H x D) |
45
x 128 x 173mm
|
|
Weight |
160 g
|
The eX 822S works as a hot-standby Central Processing Card (CPC) for
the eX 821S. The module slots into a dedicated slot in the eX 802S Dual
CPC Main Frame and monitors the operation of the primary CPC. In the
event of failure to the primary CPC, the secondary CPC will automatically
take over the entire operation. The switchover is instantaneous while
an audible warning is emitted in the event of failure for rectification
work. Every event is logged for reporting and available for print-out
from the GUI.
|
|
eX
822S
|
|
Connector |
1
No. RJ 45 Connector
1 No. USB Connector
1 No. DB9 Female Connector
|
|
Power
Requirement |
24
Vdc (From Backplane), 650 mA
|
|
Material
& Finish |
Mild
Steel; Epoxy Coated Steele Blue (RAL 5011)
|
|
Dimensions
(W x H x D) |
35.5
x
128 x 173mm
|
|
Weight |
130 g
|
The
eX 821SE is the Central Processing Card that converts the eX 800S Matrix
Sound Management System into a full fledged Early Evacuation System
(EES) for internal hazards such as a fire or gas leak (Phased Evacuation)
while the eX 821SX performs both internal hazard evacuation and external
hazard evacuation such as a bomb threat or threat from adjacent building
(Optimal Evacuation). The EES automates the evacuation process of
the entire building upon receiving the trigger signal from the fire
alarm system or either by manual triggering. The system is able to
simultaneously broadcast up to 32 different messages to different
areas to alert people during an emergency situation.
|
|
eX
821SE / eX 821SX
|
|
Connector |
1
No. RJ 45 Connector
1 No. USB Connector
1 No. DB9 Female Connector
|
|
Power
Requirement |
24
Vdc (From Backplane), 650 mA
|
|
Material
& Finish |
Mild
Steel; Epoxy Coated Steele Blue (RAL 5011)
|
|
Dimensions
(W x H x D) |
45
x 128 x 173mm
|
|
Weight |
160 g
|
The
eX 822SE works as a hot-standby Central Processing Card (CPC) for the
eX 821SE while the eX 822SX is for the eX 821SX. The module slots into
a dedicated slot in the eX 802S Dual CPC Main Frame and monitors the
operation of the primary CPC. In the event of failure to the primary
CPC, the secondary CPC will automatically take over the entire operation.
The switchover is instantaneous while an audible warning is emitted
in the event of failure for rectification work. Every event is logged
for reporting and available for print-out from the GUI.
|
|
eX
822SE / eX 822SX
|
|
Connector |
1
No. RJ 45 Connector
1 No. USB Connector
1 No. DB9 Female Connector
|
|
Power
Requirement |
24
Vdc (From Backplane), 650 mA
|
|
Material
& Finish |
Mild
Steel; Epoxy Coated Steele Blue (RAL 5011)
|
|
Dimensions
(W x H x D) |
35.5
x 128 x 173mm
|
|
Weight |
130 g
|
This card serves as a data and audio signal transmission link to the
extension frame via 4 RJ45 connectors. It enables the main frame to
communicate with the extension frame.
|
|
eX
823S
|
|
Connector |
4
Nos. RJ 45 Connector
|
|
Power
Requirement |
24
Vdc (From Backplane), 100 mA
|
|
Material
& Finish |
Mild
Steel; Epoxy Coated Steele Blue (RAL 5011)
|
|
Dimensions
(W x H x D) |
35.5
x 128 x 173mm
|
| |
Weight
|
310 g |
This
card receives data and audio signal from the main frame. Supports
data and audio signal transmission to other extension frame if required
via 8 RJ 45 connectors.
|
|
eX
824S
|
|
Connector
|
8
Nos. RJ 45 Connector
|
|
Power
Requirement
|
24
Vdc (From Backplane), 80 mA |
|
Material
& Finish |
Mild
Steel; Epoxy Coated Steele Blue (RAL 5011)
|
|
Dimensions
(W x H x D) |
45
x 128 x 173mm
|
| |
Weight
|
190 g |
The
eX 831S Auxiliary Input Card serves as the pre-amplifier for sources
like background music, digital messages and microphones. Each card
features two Auxiliary Inputs with Control Input. The audio inputs
feature jumper settings for either microphone (-70dB to -45dB) or
line in (-20dB to 8dB). The Auxiliary inputs are stereo inputs for
background music player and individual gain can be adjusted via recessed
potentiometer. The card can also provide phantom power if connected
to a condenser microphone. The eX 831S card utilises RJ45 connectors
for both audio input and control input. This card is to be installed
in the eX 801S or eX 802S Main Frame only.
|
|
eX
831S
|
|
No.
of Channel
|
2
|
|
Input
Sensitivity
|
MIC:
-70 to -45 dB (adjustable) with built in Audio Limiter, 600
Ω, unbalanced
LINE: -20 to +8 dB (adjustable), 10 kΩ, balanced MIC or
LINE selectable by the built-in jumper
|
|
Low
Frequency Filter (100 Hz)
|
-15
dB to + 15 dB Boost & Cut (adjustable)
|
|
High
Frequency Filter (10 kHz)
|
-15
dB to + 15 dB Boost & Cut (adjustable)
|
| |
Distortion
|
<0.5% |
| |
Frequency
Response
|
20Hz
- 20kHz |
| |
Phantom
Power
|
7.5V
|
| |
Control
Input
|
Dry
Contact Activation |
| |
Control
|
2
Nos. Volume Control |
| |
Connector
|
2
Nos. RJ 45 Connector |
| |
Power
Requirement |
24
Vdc (From Backplane), 30 mA
|
| |
Material
& Finish
|
Mild
Steel; Epoxy Coated Steele Blue (RAL 5011)
|
| |
Dimensions
(W x H x D)
|
35.5
x 128 x 173mm |
| |
Weight
|
157 g |
The
eX 832S Auxiliary Input and Digital Source Card is a 2-in-1 card which
features an auxiliary input (switchable between MIC and LINE level)
as well as a digital source module which stores and plays audio files
in MP3 format. The digital source module utilizes Multimedia Card
(MMC) as a storage medium which is able to store up to 128 background
music (BGM) or messages in a single card. Similar to the eX 831S, the
eX 832S features jumper selection settings, stereo inputs, phantom
power and individual gain control. The eX 832S provides an RJ45 connector
for Audio and Control Input as Auxiliary Input and a USB port for
file transfer to the MMC. This card is to be installed in the eX 801S
or eX 802S Main Frame only.
|
|
eX
832S
|
|
No.
of Channel
|
1
Channel - AUX Input
1 Channel - Digital Source
|
|
Input
Sensitivity
for AUX Input
|
MIC:
-70 to -45 dB (adjustable) with built in Audio Limiter, 600Ω, unbalanced
LINE: -20 to +8 dB (adjustable), 10 kΩ, balanced
MIC or LINE selectable by the built-in jumper
|
|
Low
Frequency Filter
( 100 Hz ) - for AUX Input
|
-15
dB to +15 dB Boost & Cut (adjustable)
|
|
High
Frequency Filter
( 100 Hz ) - for AUX Input
|
-15
dB to +15 dB Boost & Cut (adjustable)
|
| |
Distortion
|
<
0.5 % - AUX Input
< 0.5 % - Digital Source
|
| |
Frequency
Response
|
20
Hz - 20 kHz - AUX Input
20 Hz - 20 kHz ( 44.1 kHz sampling ) - Digital Source
|
| |
Control
Input
|
Dry
Contact Activation
|
| |
Control
|
1
No. Volume Control |
| |
Connector |
1
No. RJ 45 Connector - AUX Input
1 No. USB Connector - Digital Source
|
| |
External
Storage |
Multimedia
Card (MMC)
|
| |
Playback
Mode |
Single
Source Playback
|
| |
No.
of Playback
Program
|
128
Programs
|
| |
Power
Requirement |
24
Vdc (From Backplane), 30 mA
|
| |
Material
& Finish |
Mild
Steel; Epoxy Coated Steele Blue (RAL 5011)
|
| |
Dimensions
(W x H x D) |
35.5
x 128 x 173mm
|
| |
Weight |
200 g
|
The
eX 833S Dual Channel Digital Source Card provides 2 channels of digital
source for both messages and audio files. It is able to store and
playback up to 128 BGM or messages per card and uses Multimedia Card
(MMC) as a storage medium. Moreover, the card is integrated with two
USB ports for file transfer to the MMC via a personal computer. This
card is to be installed in eX 801S or eX 802S Main Frame only.
|
|
eX
833S
|
|
No.
of Channel
|
2
|
|
Distortion
|
<0.5%
|
|
Frequency
Response
|
20Hz
- 20kHz
|
|
Playback
Mode
|
Dual
source playback
|
| |
No.
of Playback
Program
|
128
Program - Each Channel
|
| |
Connector
|
2
Nos. USB Connector
|
| |
Power
Requirement
|
24
Vdc (From Backplane), 100 mA
|
| |
Material
& Finish
|
Mild
Steel; Epoxy Coated Steele Blue (RAL 5011)
|
| |
Dimensions
(W x H x D) |
35.5
x 128 x 173mm
|
| |
Weight |
220 g
|
The
eX 834S Microphone Input Card provides two inputs for Remote Microphones
and Emergency Microphones. Each input channel is able to communicate
with eight Remote Microphones or a combination of four Emergency Microphones
and 4 Remote Microphones. The eX 834S utilizes RJ45 connectors for
Audio and Data Input. This card is to be installed in eX 801S or eX
802S Main Frame only.
|
|
eX
834S
|
|
No.
of Channel
|
2
|
|
Connectable
Microphone
|
eX
865S, eX 866S, eX 867S, eX 868S, eX 861S, eX 862S, eX 863S, eX 864S
|
|
Connector |
2
Nos. RJ 45 Connector
|
|
Power
Requirement
|
24
Vdc (From Backplane), 100 mA
|
| |
Material
& Finish
|
Mild
Steel; Epoxy Coated Steele Blue (RAL 5011)
|
| |
Dimensions
(W x H x D)
|
35.5
x 128 x 173mm
|
| |
Weight |
158 g
|
The
eX 837S provides two 0 dB electronically balanced audio outputs with
individual gain control via the Control Manager software. A dry contact
output is available to provide external control which can be used
for overriding the audio attenuator when the channel is activated.
The module either connects directly to the power amplifier inputs
or through the LA 08 Integrated Supervisory Unit for line supervisory
& amplifier changeover purposes.
|
|
eX
837S
|
|
No.
of Channel
|
2
|
|
Output
Level & Impedance
|
0
dBV, 600Ω Balanced
|
|
Control
Output |
NO
or NC Dry Contact (Max 24 Vdc, 1 A)
|
|
Connector
|
2
Nos. RJ 45 Connector;
1 No. 1 x 4-Pin Panel Feed Through Connector
|
| |
Power
Requirement |
24
Vdc (From Backplane), 150 mA
|
| |
Material
& Finish
|
Mild
Steel; Epoxy Coated Steele Blue (RAL 5011)
|
| |
Dimensions
(W x H x D)
|
35.5
x 128 x 173mm
|
| |
Weight |
205 g
|
The
eX 839S is similar with the eX 837S with additional built-in line supervisory
using impedance measurement technique for both channels and amplifier
switchover function in the event of amplifier failure. When a loudspeaker
line short circuit is detected, the module automatically isolates
the power amplifier from the faulty line to prevent it from damage.
The module enables the system to comply to the IEC/EN 60849 requirement
that calls for two separate loudspeaker circuits in one loudspeaker
zone. There are two selectable modes of operation : Continuous Monitoring
(as required by IEC/EN 60849) or Scheduled Monitoring. Continuous
monitoring requires an additional end-of-line detector module and
a pair of return cable back to the unit.
|
|
eX
839S
|
|
No.
of Channel
|
2
|
|
Output
Level & Impedance
|
0
dBV, 600Ω Balanced
|
|
Control
Output |
NO
or NC Dry Contact (Max 24 Vdc, 1 A)
|
|
Connector
|
2
Nos. RJ 45 Connector;
1 No. 2 x 14-Pin Panel Feed Through Connector
|
| |
Power
Requirement |
24
Vdc (From Backplane), 150 mA
|
| |
Material
& Finish
|
Mild
Steel; Epoxy Coated Steele Blue (RAL 5011)
|
| |
Dimensions
(W x H x D)
|
35.5
x 128 x 173mm
|
| |
Weight |
250 g
|
The
eX 841S Control Input Card provides up to 16 control sensor inputs
where it is able to receive dry contact signals provided by any external
system. All the inputs are opto-isolated. These sensor inputs data
will be transmitted to the Central Processing Unit for further processing.
|
|
eX
841S
|
|
No.
of Channel
|
16
|
|
Sensing
Method
|
Dry
Contact or Current Loop (jumper selectable)
|
|
Dry
Contact Method
|
NO
or NC (jumper selectable)
|
|
Current
Loop Method
|
Released
Voltage 24 Vdc, 5 mA
|
| |
Connector
|
4
Nos. RJ 45 connector
|
| |
Power
Requirement |
24
Vdc (From Backplane), 100 mA
|
| |
Material
& Finish
|
Mild
Steel; Epoxy Coated Steele Blue (RAL 5011)
|
| |
Dimensions
(W x H x D)
|
35.5
x 128 x 173mm
|
| |
Weight
|
158 g
|
The
eX 842S Control Output Card provides up to 16 make/break relay contact
outputs where it transmits output signal to any external system. Each
card channel is able to withstand voltage of 24 Vdc / 120 Vac and
control current of 250mA.
|
|
eX
842S
|
|
No.
of Channel
|
16
|
|
Triggering
Method
|
NO
or NC Dry Contact (jumper selectable)
|
|
Withstand
Voltage |
24Vdc,
250mA
|
|
Connector
|
4
nos. RJ 45 Connector
|
| |
Power
Requirement |
24
Vdc (From Backplane), 320 mA
|
| |
Material
& Finish
|
Mild
Steel; Epoxy Coated Steele Blue (RAL 5011)
|
| |
Dimensions
(W x H x D)
|
35.5
x 128 x 173mm
|
| |
Weight
|
230 g
|
The
Emergency Microphone produces 0 dB Audio Balanced Output and communicates
with eX 834S Microphone Input Card via RS 485 Communication line. Each
communication line is able to connect 4 Emergency and 4 Remote Microphones
or 8 Remote Microphones. It has a maximum distance of 1.2 km for a
single Emergency Microphone. The Emergency Microphone features a built-in
siren, audio gain control and auto mic OFF when it is left unattended.
The Emergency Microphones are equipped with programmable function
keys. These function keys can be programmed to perform zone selection,
relay activation or any other matrix activities. There are four models
for Emergency Microphones, namely eX 861S (10 functions), eX 862S (20
functions), eX 863S (40 functions) and eX 864S (120 functions). The microphones
can either be a desktop unit or wall mounted using optional mounting
bracket.
|
|
eX
861S
|
eX
862S |
|
Output
Level &
Impedance
|
0
dBV 600Ω Balanced
|
0
dBV 600Ω Balanced |
|
Mircophone
|
Handheld
Omni-Directional Microphone |
Handheld
Omni-Directional Microphone |
|
Distortion |
<1%
|
<1% |
|
Frequency
Response
|
100Hz
- 20kHz
|
100Hz
- 20kHz |
| |
Signal-to-Noise
Ratio
|
>
60dB
|
>
60dB |
| |
Internal
Monitor Speaker
|
0.5W |
0.5W |
| |
Volume
Control
|
Microphone
Level
Control,Monitor Speaker
Level Control, Siren
Level Control.
|
Microphone
Level
Control,Monitor Speaker
Level Control, Siren
Level Control. |
| |
Auto
Mic OFF |
15
sec. to 2 min.
|
15
sec. to 2 min. |
| |
Number
of Programmable Functions
|
10
|
20 |
| |
Number
of Connectable
Units
|
4 |
4
|
| |
Communication
Protocol
|
RS
485
|
RS
485 |
| |
Connector
|
RJ
45, plug-in screw connector
|
RJ
45, plug-in screw connector |
| |
Communication
Distance
|
1.2
km |
1.2
km |
| |
Power
Requirement
|
24
Vdc (Regulated), 300 mA
|
24
Vdc (Regulated), 320 mA |
| |
Material
& Finish
|
ABS
Resin & Aluminium, Epoxy Powder Coated Steele Blue (RAL
5011 )
|
ABS
Resin & Aluminium, Epoxy Powder Coated Steele Blue (RAL
5011 )
|
| |
Dimensions
(W x H x D)
|
265
x 64.5 x 185mm |
265
x 64.5 x 185mm |
| |
Weight
|
1.3 kg |
1.3 kg |
|
|
eX
863S
|
eX
864S |
|
Output
Level &
Impedance
|
0
dBV 600Ω Balanced
|
0
dBV 600Ω Balanced |
|
Mircophone
|
Handheld
Omni-Directional Microphone
|
Handheld
Omni-Directional Microphone
|
|
Distortion |
<1%
|
<1% |
|
Frequency
Response
|
100Hz
- 20kHz |
100Hz
- 20kHz |
| |
Signal-to-Noise
Ratio
|
>60
dB |
>60
dB |
| |
Internal
Monitor Speaker
|
0.5
W |
0.5
W |
| |
Volume
Control
|
Microphone
Level
Control,Monitor Speaker
Level Control, Siren
Level Control
|
Microphone
Level
Control,Monitor Speaker
Level Control, Siren
Level Control |
| |
Auto
Mic OFF |
15
sec. to 2 min.
|
15
sec. to 2 min. |
| |
Number
of Programmable Functions
|
40
|
120 |
| |
Number
of Connectable Units
|
4 |
4 |
| |
Communication
Protocol
|
RS
485 |
RS
485 |
| |
Connector
|
RJ
45, plug-in screw connector
|
RJ
45, plug-in screw connector |
| |
Communication
Distance
|
1.2km |
1.2km |
| |
Power
Requirement
|
24
Vdc (Regulated), 320 mA
|
24
Vdc (Regulated), 420 mA |
| |
Material
& Finish
|
ABS
Resin & Aluminium, Epoxy Powder Coated Steele Blue (RAL
5011 )
|
ABS
Resin & Aluminium, Epoxy Powder Coated Steele Blue (RAL
5011 ) |
| |
Dimensions
(W x H x D)
|
265
x 64.5 x 185mm |
475
x 64.5 x 185mm |
| |
Weight
|
1.3 kg |
2.0 kg |
The
Remote Microphone produces 0 dB Balanced Audio Output and communicates
with the eX 834S Microphone Input Card via RS 485 communication. Each
communication line can support up to 4 Emergency and 4 Remote Microphones
or 8 Remote Microphones. Maximum cabling distance is 1.2 km (for a
single Remote Microphone). The Remote Microphone features a built-in
chime, audio gain control and Auto Mic Off if left unattended for
a preset period of time. The Remote Microphone are equipped with programmable
function keys. These function keys can be programmed to perform zone
selection, relay activation or any other matrix activities. There
are four models for Remote Microphones, namely eX 865S (10 functions),
eX 866S (20 functions), eX 867S (40 functions) and eX 868S (120 functions).
The microphones can be desktop unit.
|
|
eX
865S
|
eX
866S |
|
Output
level &
Impedance
|
0
dBV 600Ω Balanced |
0
dBV 600Ω Balanced |
|
Gooseneck
Mircophone |
Undirectional
electret
condenser microphone
|
Undirectional
electret
condenser microphone |
|
Distortion
|
<1%
|
<1% |
| |
Frequency
Response
|
100
Hz - 20 kHz
|
100
Hz - 20 kHz |
| |
Signal-to-Noise
Ratio
|
>
60dB |
>
60dB |
| |
Internal
Monitor Speaker
|
0.5W
|
0.5W |
| |
Volume
Control |
Microphone
Level
Control, Monitor
Speaker Level Control,
Chime Level Control.
|
Microphone
Level
Control, Monitor
Speaker Level Control,
Chime Level Control.
|
| |
Auto
Mic OFF |
15
sec. to 2 min.
|
15
sec. to 2 min. |
| |
Number
of Programmable Functions
|
10 |
20 |
| |
Number
of Connectable Units
|
8
(include Emergency Mic)
|
8
(include Emergency Mic) |
| |
Communication
Protocol
|
RS
485
|
RS
485 |
| |
Connector
|
RJ
45, Panel Feed Through
Connector |
RJ
45, Panel Feed Through
Connector
|
| |
Communication
Distance
|
1.2
km |
1.2
km |
| |
Power
Requirement |
24
Vdc (Regulated), 230 mA
|
24
Vdc (Regulated), 250 mA |
| |
Material
& Finish
|
ABS
Resin & Aluminium Epoxy Powder Coated Steele Blue
(RAL 5011) |
ABS
Resin & Aluminium Epoxy Powder Coated Steele Blue
(RAL 5011)
|
| |
Dimensions
(W x H x D)
|
210
x 64.5 x 185 mm |
210
x 64.5 x 185 mm |
| |
Weight
|
1.2 kg |
1.2 kg |
|
|
eX
867S
|
eX
868S |
|
Output
level &
Impedance
|
0
dBV 600Ω Balanced |
0
dBV 600Ω Balanced |
|
Gooseneck
Mircophone |
Undirectional
electret
condenser microphone
|
Undirectional
electret
condenser microphone
|
|
Distortion
|
<1%
|
<1% |
| |
Frequency
Response
|
100
Hz - 20 kHz
|
100
Hz - 20 kHz |
| |
Signal-to-Noise
Ratio
|
>
60dB |
>
60dB |
| |
Internal
Monitor Speaker
|
0.5
W
|
0.5
W |
| |
Volume
Control |
Microphone
Level
Control, Monitor
Speaker Level Control,
Chime Level Control.
|
Microphone
Level
Control, Monitor
Speaker Level Control,
Chime Level Control.
|
| |
Auto
Mic OFF |
15
sec. to 2 min.
|
15
sec. to 2 min. |
| |
Number
of Programmable Functions
|
40 |
120 |
| |
Number
of Connectable Units
|
8
(include Emergency Mic)
|
8
(include Emergency Mic) |
| |
Communication
Protocol
|
RS
485
|
RS
485 |
| |
Connector
|
RJ
45, Panel Feed Through
Connector
|
RJ
45, Panel Feed Through
Connector |
| |
Communication
Distance
|
1.2
km |
1.2
km |
|
Power
Requirement |
24
Vdc (Regulated), 250 mA
|
24
Vdc (Regulated), 350 mA |
| |
Material
& Finish
|
ABS
Resin & Aluminium Epoxy Powder Coated Steele Blue (RAL
5011 ) |
ABS
Resin & Aluminium Epoxy Powder Coated Steele Blue (RAL
5011)
|
| |
Dimensions
(W x H x D)
|
210
x 64.5 x 185 mm |
430
x 64.5 x 185 |
| |
Weight
|
1.2 kg |
1.8
kg |
The
eX 881S Power Supply Inlet Card accepts regulated 24 Vdc power supply
through its 3 pin terminal block, which includes an earth termination.
The card also provides power failure and CPU off dry contact outputs
to external system.
|
|
eX
881S
|
|
Power
Handling
|
24
Vdc (Regulated), 3 A
|
|
Connector
|
1
No. 3-Pin Terminal Block;
1 No. 4-Pin Panel Feed Through Connector
|
|
Material
& Finish
|
Mild
Steel; Exopy Coated Steele Blue (RAL 5011)
|
| |
Dimensions
(W x H x D)
|
19.5
x 128 x 173 mm
|
| |
Weight |
100 g
|
|
|
| |
 |
The use of the ES 100 Emergency Power Supply is for systems that require a secondary power supply to be available following primary power failure. The unit connects to a battery bank, with automatic charging and monitoring with fault reporting to the main system. In the event of primary power failure, the battery supply is switched over to the equipments connected to it. The unit prevents over discharging to prolong the battery life. Recharging resumes once the primary power is returned.
|
|
|
.gif)
.gif)
.gif)
.gif)
.gif)
.gif)
.gif)
.gif)
.gif)
.gif)
.gif)
.gif)
