| |
Designed
for use with the XM 10A Modular Mixer Enclosure, the XM 31A provides
a balanced microphone input for the ME 1 Handheld microphone via a
5-pin microphone socket. A parallel connected 1/4” phone socket
is also available. The input sockets are located on the front panel
of the unit. The unit also features a Talk Switch for microphone preamplifier
module activation.
|
Item |
Specifications
|
|
Inputs |
One
front 5-pin microphone soket
& one front phone socket (parallel)
|
|
Outputs |
5
pin DIN socket
|
|
Dimensions
(W x H x D) |
34.2
x 131 x 197 mm
|
|
Weight |
123g
|
|
Finish |
Steele
Blue (RAL 5011)
|
Designed
for use with the XM 10A Modular Mixer Enclosure, the XM 32A serves
as a microphone level pre-amplifier module. Designed to work seamlessly
with AEX System’s whole range of handheld microphones, the module
accepts a -60 dBV level input via a 5-pin DIN socket located at the
rear of the module. The module also provides 8 user selectable functions,
which plays an important role in setting up a flexible multi-channel
system.
|
Item |
Specification
|
|
Input
Sensitivity & Impedance |
-60
dBV, 600 Ω (balanced)
|
|
Output
Level & Impedance |
-20
dBV, 10 kΩ
|
|
Frequency
Response |
20
Hz ~ 20 kHz
|
|
THD
+ Noise |
Less
than 0.5%
|
| |
Power
Requirement |
24
Vdc, 36 mA
|
|
Programming
Functions |
Top
Priority, FIFO Priority, CASCADE Priority, Speech Filter, Priority
Channel Trigger, Chime Activation, Mic Enable Chime Selection
|
|
Indicator |
In-use
green LED
|
|
Control |
1
rotary volume control
|
|
Connections |
Input:
5-pin DIN socket
Output: 30 pin header & housing connector
|
|
Dimensions
(W x H x D) |
34.2
x 131 x 197 mm
|
|
Weight |
140
g
|
|
Finish |
Steele
Blue (RAL 5011)
|
Designed
for use with the XM 10A Modular Mixer Enclosure, the XM 33A serves
as a line level pre-amplifier module. The module works seamlessly
with AEX System’s CP 102 Paging Console Communication Panel accepting
a 0 dBV input via a 5-pin DIN socket located at the rear of the module.
The module input is transformer-isolated. The module also provides
8 user selectable functions, which plays an important role in setting
up a flexible multi-channel system.
|
Item |
Specification
|
|
Input
Sensitivity & Impedance |
0
dBV, 10 kΩ (transformer-isolated, balanced)
|
|
Output
Level & Impedance |
-20
dBV, 10 kΩ
|
|
Frequency
Response |
20
Hz ~ 20 kHz
|
|
THD
+ Noise |
Less
than 0.5%
|
| |
Power
Requirement |
24
Vdc, 36 mA
|
|
Programming
Functions |
Top
Priority, FIFO Priority, CASCADE Priority, Speech Filter, Priority
Channel Trigger, Chime Activation, Mic Enable Chime Selection
|
|
Indicator |
In-use
green LED
|
|
Control |
1
rotary volume control
|
|
Connections |
Input:
5-pin DIN socket
Output: 30 pin header & housing connector
|
|
Dimensions
(W x H x D) |
34.2
x 131 x 197 mm
|
|
Weight |
154
g
|
|
Finish |
Steele
Blue (RAL 5011)
|
Designed
for use with the XM 10A Modular Mixer Enclosure, the XM 34A serves
as a mono music input preamplifier to the system. The module accepts
either a 0 dBV level or -20 dBV level (user selectable) input via
a 5-pin DIN socket located at the rear of the module. The unit features
an automatic mute function during a higher priority input; with a
muting level control.
|
Item |
Specification
|
|
Input
Sensitivity & Impedance |
-20
/ 0 dBV, 100 Ω balanced (switchable)
|
|
Output
Level & Impedance |
-20
dBV, 10 kΩ
|
|
Frequency
Response |
20
Hz ~ 20 kHz
|
|
THD
+ Noise |
Less
than 0.3%
|
| |
Power
Requirement |
24
Vdc, 22 mA
|
|
Programming
Functions |
Automatic
mute
|
|
Indicator |
In-use
green LED
|
|
Control |
1
rotary volume control
1 muting level control
|
|
Connections |
Input:
5-pin DIN socket
Output: 30 pin header & housing connector
|
|
Dimensions
(W x H x D) |
34.2
x 131 x 197 mm
|
|
Weight |
129
g
|
|
Finish |
Steele
Blue (RAL 5011)
|
Designed
for use with the XM 10A Modular Mixer Enclosure, the XM 35A serves
as stereo music input preamplifier to the system. The module accepts
a stereo input via RCA socket and combines to a mono signal electronically.
The module accepts -20 dBV, 0 dBV, 6 dBV or 9 dBV input levels (user
selectable) to cater for different types of music players in the market.
The unit features an automatic mute function for muting during higher
priority input; with a muting level control.
|
Item |
Specification
|
|
Input
Sensitivity & Impedance |
-20
dBV, 0 dBV, 6 dBV, 9 dBV
|
|
Output
Level & Impedance |
-20
dBV, 10 kΩ
|
|
Frequency
Response |
20
Hz ~ 20 kHz
|
|
THD
+ Noise |
Less
than 0.5%
|
| |
Power
Requirement |
24
Vdc, 36 mA
|
|
Programming
Functions |
Automatic
mute
|
|
Indicator |
In-use
green LED
|
|
Control |
1
rotary volume control
1 muting level control
|
|
Connections |
Input:
RCA socket
Output & Power: 30 pin header & housing connector
|
|
Dimensions
(W x H x D) |
34.2
x 131 x 197 mm
|
|
Weight |
125
g
|
|
Finish |
Steele
Blue (RAL 5011)
|
Designed
for use with the XM 10A Modular Mixer Enclosure, the XM 51A serves
as a source selector to the system. Able to accept 5 different program
source via a screw terminal block on the module. Provides both balanced
and unbalanced outputs, one gain control and an automatic mute for
muting during higher priority input. The balanced output is independent
of the gain control and muting function. The selection of input is
via a rotary selector switch on the front panel.
|
Item |
Specification
|
|
Input |
5
inputs
|
|
Outputs |
1
balanced output
1 unbalanced output, -20 dBV
|
|
Programming
Functions |
Automatic
mute
|
|
Selector |
5
program + 1 OFF rotary switch
|
| |
Power
Requirement |
24
Vdc, 4 mA
|
|
Controls |
1
gain level control
1 muting level control
1 backplace signal O/P slide swith
|
|
Connections |
Input:
screw terminal
Balanced Output: screw terminal
Unbalanced Output: 30 pin header & housing connector
|
|
Dimenions
(W x H x D) |
34.2
x 131 x 197 mm
|
|
Weight |
187
g
|
|
Finish |
Steele
Blue (RAL 5011)
|
Designed
for use with the XM 10A Modular Mixer Enclosure, the XM 52A serves
as a parallel source selector to the system. Able to accept 4 different
program sources via a screw terminal block on the module. Each of
the 4 source inputs has individual dedicated outputs, thus enabling
4 different input sources to be routed to 4 different pre amplifier
modules.
|
Item |
Specification
|
|
Input |
4
inputs
|
|
Output |
4
outputs
|
|
Connections |
Automatic
mute
|
|
Dimensions
(W x H x D) |
34.2
x 131 x 197 mm
|
| |
Weight |
151
g
|
|
Finish |
Steele
Blue (RAL 5011)
|
Designed
for use with the XM 10A Modular Mixer Enclosure, the XM 61A provides
3 types of user selectable emergency tones; Siren, Yelp and Buzzer.
The emergency tone’s duration can be adjusted via an on-board
potentiometer, while the emergency tone signal level can be adjusted
via a volume control located on the module’s facial. The module
provides visual indicators for ALARM in progress and MIC ready. An
indication signal is also provided via a 5-pin DIN socket located
at the rear of the module.
|
Item |
Specification
|
|
Signal |
Siren,
Yelp or Buzzer (selectable)
|
|
Frequency |
Siren:
400 - 750 Hz
Yelp: 500 - 750 Hz
Buzzer: 400 Hz
|
|
Max
Alarm Duration |
Adjustable
up to 60 seconds
|
|
Output
Level & Impedance |
-20
dBV, 10 kΩ
|
| |
Power
requirement |
24
Vdc, 38 mA
|
|
Indicators |
1
ALARM in progress red LED
1 MIC ready green LED
|
| |
Controls |
1
alarm level control
1 alarm duration control
|
| |
Connections |
Indication
Out: 5-pin DIN socket
Output & Power: 30 pin header & housing connector
|
| |
Dimensions
(W x H x D) |
34.2
x 131 x 197 mm
|
| |
Weight |
134
g
|
| |
Finish |
Steele
Blue (RAL 5011)
|
Designed
for use with the XM 10A Modular Mixer Enclosure, the XM 62A provides
6 types of user selectable chimes for the system. The chime can be
triggered by the XM 32A or XM 33A Microphone Pre-amplifier modules
or externally triggered by other devices via its 9-pin D-Type socket
located at the rear of the module. The chime’s signal level can
be adjusted via a volume control located on the module’s facial.
The module provides visual indicators for CHIME in progress and MIC
ready.
|
Item |
Specification
|
|
Signals |
Going,
Single Tone, 2 tone ascending, 2 tone ascending-descending,
4 tone ascending, 4 tone ascending descending (user selectable)
|
|
Outputs
Level & Impedance |
-20
dBV, 10 kΩ
|
|
Indicators |
1
CHIME in progress red LED
1 MIC ready freen LED
|
|
Power
Requirement |
24
Vdc, 38 mA
|
| |
Controls |
1
chime level control
1 reset button
|
|
Connections |
External
Trigger: 9-pin D-Type Female Socket
Output: 30 pin header & housing connector
|
| |
Dimensions
(W x H x D) |
34.2
x 131 x 197 mm
|
| |
Weight |
140
g
|
| |
Finish |
Steele
Blue (RAL 5011)
|
Designed
for use with the XM 10A Modular Mixer Enclosure, the XM 71A accepts
mixed and pre-amplified signals from other modules and amplifies to
0 dBv level before going to the power amplifiers. The module features
a bass and treble control on the front panel for sound equalisation.
The module also provides a Priority channel trigger signal to trigger
the priority channel of the power amplifier if required.
|
Item |
Specification
|
|
Input
Sensitivity |
-20
dBV
|
|
Output
Level & Impedance |
0
dBV, 600 Ω (electrically balanced)
|
|
Frequency
Response |
20
Hz ~ 20 kHz
|
|
THD
+ Noise |
Less
than 0.2%
|
| |
Tone
Controls |
Bass:
+/- 10 dB @ 100 Hz
Treble: +/- dB @ 10 kHz
|
|
Power
Requirement |
24
Vdc, 83 mA
|
| |
Indicator |
VU
meter with clip indication
|
| |
Control |
1
rotary volume control
BASS & TREBBLE Control
|
| |
Connections |
Input:
30 pin header & housing connector
Output: 5 pin DIN connector
|
| |
Dimensions
(W x H x D) |
34.2
x 131 x 197 mm
|
| |
Weight |
145
g
|
|
Finish |
Steele
Blue (RAL 5011)
|
Designed
for use with the XM 10A Modular Mixer Enclosure, the XM 41A Extension
module is used if more than one frame is required. The extension module
passes all the signals from the backplace PCB from one frame to the
next frame via 9 pin D-Type connectors.
|
Item |
Specification
|
|
Connections |
9-pin
D-Type Female Socket
30 pin header & housing connector
|
|
Dimensions
(W x H x D) |
24.2
x 131 x 197 mm
|
|
Weight |
136
g
|
|
Finish |
Steele
Blue (RAL 5011)
|
These
panels are used to cover the unused slots on the modular mixer enclosure.
|
Item |
Specification
|
|
Dimensions
(W x H) |
XM
11A: 34.2 x 131 mm
XM 12A: 68.4 x 131 mm
|
|
Weight |
XM
11A: 37g
XM 12A: 74g
|
|
Finish |
Steele
Blue (RAL 5011)
|
The
XM 10A Modular Mixer Enclosure can accommodate up to 10 modules and
is equipped with a built in XM 92A Power Supply module to provide
power to all the modules installed. All the modules are connected
to the backplane PCB through 30 pin header and housing connector pairs.
The backplane PCB is specially designed to eliminate inter module
wiring and provide the priority function to the system.
|
Item |
XM
10A
|
|
Input
Capacity |
10
modules maximum
|
|
Dimensions
(W x H x D) |
483
x 133 x 196 mm
|
|
Weight |
4
kg
|
| |
Finish |
Steele
Blue (RAL 5011)
|
|
|
